Piksey Atto

An incredibly tiny, Arduino compatible board that is designed for makers. It can be soldered onto PCBs, used with a breadboard or by itself.

GETTING STARTED

The Piksey Atto design is based on the popular Arduino Leonardo which means that getting started is as easy as 1-2-3!

Step 1: Connect

Use a micro-USB cable to connect the Piksey Atto to your computer.


Step 2: Select

The Piksey Atto contains the Arduino Leonardo bootloader so all you have to do is select this board from the “Tools” menu. Be sure to also select the correct “COM port” and the actual number will depend on your system


Step 3: Upload

Use a micro-USB cable to connect the Piksey Atto to your computer.Open the sketch that you intend to use and then hit the Upload button. The Arduino IDE will automatically compile your sketch, upload it to the board and the Piksey Atto will start running your sketch immediately.

RESOURCES

The Piksey Atto was designed to be embedded into circuits. We have created an Eagle and KiCad library to help you get started. Use the following link to access the repository.

BLOG POSTS