BnBe Club
  • Home
  • Products
    • Piksey Atto
    • BBox 2
    • BBox 1
    • Piksey Pico
  • Projects
  • Shop
  • Contact

wemos d1 mini

DIY Projects

Creating a Digital Timer Using Blynk

Step 1: Watch the Video The video above goes over the entire process of creating a digital timer and we cover some additional information that is not present in this post. I’d recommend watching it first before proceeding. Step 2: Set-Up the APP Start by downloading the app from the Read more…

By frenoy, 10 months10 months ago
DIY Projects

Automating an RGB Lamp With Your Phone by Using Hassio

Step 1: Watch the Video The video above gives you all the information you need to build this yourself. This post will only provide the final configuration file that can be used as a starting point. Step 2: Wire the LEDs You can use the reference wiring diagram above to Read more…

By frenoy, 10 months10 months ago
DIY Projects

Sensor Logging Using InfluxDB, Grafana

In this post, we learn how to use InfluxDB for long term sensor data storage and we use Grafana for data analysis. This is part of the home automation series where we learn how to set up and use Home Assistant so all this will be done using Hassio. Step Read more…

By frenoy, 10 months10 months ago
DIY Projects

ESPHome – Home Automation Simplified

I was pleasantly surprised when I decided to try to add some DIY sensors to home assistant. Using ESPHome is extremely simple and in this post, we will learn how to control a GPIO pin and also obtain temperature & humidity data from a wireless node, by using Home Assistant. Read more…

By frenoy, 10 months10 months ago
DIY Projects

MQTT Communication With the Nano 33 IoT & WeMos D1 Boards

This post will tell you everything you need to know about MQTT communication which will enable you to use it communicate between devices. We add an LED to the Arduino Nano 33 IoT board and this LED is controlled remotely from a switch that is connected to a WeMos D1 Read more…

By frenoy, 10 months10 months ago
DIY Projects

Online Weather Widget Using ESP8266

A couple of weeks ago, we learned how to build an online weather display system that obtained weather information for a particular city and displayed it on an OLED module. We used the Arduino Nano 33 IoT board for that project which is a new board that has a lot Read more…

By frenoy, 10 months10 months ago
DIY Projects

Network Time Using ESP8266

We learn how to build a cute little digital clock that communicates with NTP servers and displays network or internet time. We use the WeMos D1 mini to connect to a WiFi network, obtain the NTP time and display it on an OLED module. The video above talks you through Read more…

By frenoy, 10 months10 months ago
DIY Projects

WiFi RGB Cellular Lamp – ESP8266

In this post, we build a beautiful RGB cellular lamp that can be controlled over WiFi. The control page consists of a colour wheel which allows you to quickly change colours and you can also specify the RGB values directly to create a total of over 16 million colour combinations. Read more…

By frenoy, 10 months10 months ago
You might like these posts…
Using the Sonoff Basic With ESPHome

Using the Sonoff Basic With ESPHome

Home Automation Using the Sonoff S26 Smart Socket

Home Automation Using the Sonoff S26 Sma...

Creating a Digital Timer Using Blynk

Creating a Digital Timer Using Blynk

Object Detection With An Ultrasonic Sensor

Object Detection With An Ultrasonic Sens...

Automating an RGB Lamp With Your Phone by Using Hassio

Automating an RGB Lamp With Your Phone b...

Making A Simple 2WD Rover Using An Arduino

Making A Simple 2WD Rover Using An Ardui...

Sensor Logging Using InfluxDB, Grafana

Sensor Logging Using InfluxDB, Grafana

ESPHome – Home Automation Simplified

ESPHome – Home Automation Simplified

Making a Pi Zero Dashcam (pt. 3)

Making a Pi Zero Dashcam (pt. 3)

MQTT Communication With the Nano 33 IoT & WeMos D1 Boards

MQTT Communication With the Nano 33 IoT ...

Sign Up To Our Newsletter
Bits N Blobs Electronics

Copyright © 2020. All Rights Reserved.